220V 110V 2Ch Relay Receiver Wireless Remote Control Switch for Garage/Gate gg

Features:  
1.Big Holes, Easy To Connect With Wires  
2.Wide Voltage, For Lights / Motors / Garage / Fan / Diy  
3.300m Remote Range, 433mhz Stable Signal  
  
Specifications:  
Working Voltage: AC90~250V
Rf Frequency: 433mhz
Working Temperature: -30℃ - +70℃
Receiving Sensitivity: -117dbm
Support Encoding: Leaning Code  
Receiving Range: Open Space Is 300 Meters
Batteries: ‎1* 12V 27A Battery(Battery Included)   
Remote Operating Mode: Momentary Mode / Toggle Mode / Latched Mode
Load Power: 500W  
  
Working Modes:
You Can Set Up In 3 Modes: Momentary Mode,Toggle Mode And Latched Mode.  
Momentary Mode:  
Press And Hold A Button, 1st Relay Will Work; Release A Button,1st Relay Will Stop.  
Press And Hold B Button, 2nd Relay Will Work; Release B Button, 2nd Relay Will Stop.  
Toggle Mode:  
Press A Button, 1st Relay Will Work; Press A Button Again, 1st Relay Will Stop.  
Press B Button, 2nd Relay Will Work; Press B Button Again, 2nd Relay Will Stop.  
Latched Mode:  
Press A Button, 1st Relay Will Work; Press B Button, 1st Relay Will Stop, 2nd Relay Will Work. Press A Button Again, 2nd Relay Will Stop, 1st Relay Will Work  

Set Up:  
Momentary Mode:  
Press Learning Button Once, Press A Button Once, Succeed.  
Toggle Mode:  
Press Learning Button Twice, Press A Button Once, Succeed.  
Latched Mode:  
Press Learning Button 3times, Press A Button Once, Succeed.  
Clean Data:  
Press Learning Button 8times, The Data Will Be Cleaned. All Remotes Cannot Control This Receiver.
  
Package Included:  
1 X Receiver  
1 X Remote Control