Bilge Pump 350 500 750 1100GPH DC 12V 24V Electric Water Aquario Submersible GPH

Wireless Remote Control Smart Socket EU UK French Plug Wall 433mHz Programmable

Note: Please read before buying

1. There are three kinds of socket specifications in the options. French friends please buy the French standard "FR". We ship orders according to options

2. "1 RF socket only" represents only a socket (excluding remote control); "1 remoter only" represents only a remote control (excluding socket). The remote control and socket of this product cannot be used with other products, even if the frequency is the same. So if you have not purchased this product, please do not purchase a separate remote control or socket, otherwise you cannot use it with your product. Thank you very much for understanding

Various plug specifications

EU PLUG, UK PLUG, French PLUG

1.Senderfrequenz: 433,92 MHz

2.Betriebsspannung: 220V~~230 V, 50 Hz AC

3.Max. Stromstärke: 10 A

4.Max. Leistung: 2300 W

parameter

1.Working voltage for socket: 220V~230V 50Hz

2.Transmission frequency: 433.92MHz

3.Max. Load current: 10A

4.12V 23 A battery(battery is not included)

5.Socket size: 100*54*79mm

6.Remote control size: 104*36*14mm

Learn function button

Press once: switch the radio-controlled socket on or off manually.

Press and hold the learning button: reset the radio-controlled socket and reprogram it with the remote control.

Remote control, caring for family

no need to wake up to turn off the appliance

Flame retardant material

1.Energy saving 

2.safety protection devices

3.Environmentally friendly material

4.Ce certification

30~~100M WIRELESS RANGE

POWERFUL FR SIGNAL find outlets through doors and walls(in the open air)

After the power is turned off,  the socket remains off

No need to worry about the status of the lights when going out

Pairing signal

1.Press the pairing signal key for 5 seconds,

2.see the indicator light flashes.

3.Press the button on the remote control 4.immediately,the signal is successfully paired.

Clear signal

1. Disconnect power socket.

2. Hold down the learn button.

3. While keeping the learn button pressed, plug the power outlet into the power source.

4. Wait until the LED flashes quickly and then goes out again.

5. Release the learn button. The socket is now reset.

6. Press the learn button again to reprogram the socket.

Multiple combinations, free pairing signal

Prevent interference with the design, without affecting other TV remote controls, doorbell buttons, etc.