DJI Avata 360° Replacement Front Lens – 26.56 mm, Optical Glass, Service Part

Incl. Suction Cup, Gloves & Microfiber Cloth – For DJI Avata 360 Camera Module

Compatible Products

• DJI Avata 360 Only

️ Not Compatible With: Standard DJI Avata (non‑360) camera module, DJI Avata 2, or any other DJI drone/camera.

In The Box

• 1 × DJI Avata 360° Replacement Front Lens (Optical Glass)

• 1 × Lens Suction Cup Tool (for safe removal/placement)

• 1 × Pair Disposable Cleaning Gloves

• 1 × Disposable Lens Cleaning Microfiber Cloth

Product Overview

The DJI Avata 360° Replacement Lens is a genuine service part designed to restore the front optical element of the DJI Avata 360‑degree camera module after impact scratches or abrasion.

Precision‑ground optical glass (Ø 26.56 mm × 6.72 mm, 9 g) maintains original 360‑stitching geometry when properly installed and calibrated. The included suction cup, nitrile gloves, and cleaning cloth ensure a clean, static‑free swap. After fitting, stitching calibration via DJI Goggles or DJI Fly App is mandatory for correct 360° image alignment.

Key Features

Genuine Optical Glass Replacement

• OEM Spec: Matches original refractive index and curvature for accurate 360° stitching.

• Scratch Recovery: Restores clarity lost to rock strikes, grit, or cleaning abrasion.

️ Service‑Grade Installation Kit

• Lens Suction Cup: Lifts old lens and seats new lens without fingerprints or edge pressure.

• Nitrile Gloves: Prevent oil/contaminant transfer to optical surfaces.

• Microfiber Cloth: Remove smudges before final seating.

️ Post‑Install Calibration Required

• Stitching Calibration: Run "Lens Calibration" in DJI Goggles menu or DJI Fly App after installation.

• Ensures seam‑free 360° panoramas and video.

️ Technical Specifications

Usage Tips

• Watch Official Tutorial First: Review DJI's replacement video before starting—incorrect technique can crack the lens or damage the sensor housing.
• Work Clean: Perform replacement in dust‑free, dry environment; avoid humid bathrooms/kitchens.
• Soft Surface: Place drone on clean microfiber towel or foam pad to prevent secondary scratches.
• Use Gloves: Never touch optical glass with bare fingers—fingerprint oils are hard to remove fully.
• Calibrate: After installation, go to Goggles → Settings → Lens/Camera Calibration → 360° Stitching Calibration and follow prompts.
• Suction Cup Care: Center cup precisely on lens before lifting; gentle, even pressure only.

️ Important Notes

• 360° Module Only: This lens fits only the 360° camera variant of DJI Avata—not the standard wide‑angle module.

• Fragile Part: Optical dome is delicate; do not overtighten or pry with metal tools.

• No Returns on Installed Parts: Once the protective seal is broken and lens installed, return may be refused unless defective on arrival.

• Fogging Risk: Ensure workspace is dry; trapped moisture will fog the inner surface—if fogged, remove and re‑dry in silica‑gel chamber before reseating.