Soviet An-2 Light Biplane Transport Q Version Resin Model 3D Printed

Dimensions: length 9.5 cm width 15.7 cm height 7 cm

Production material: photosensitive resin

Production method: 3D printing

Painting method: manual painting

 

Note: 
The wheels of most models are fixed and can't turn. The model can not be pushed away, there is no return function, will not fly, will not glow, no remote control function. The wheels of some vehicle model products are ready-made accessories and can rotate.
The model material is photosensitive resin. The resin material will be deformed after being squeezed for a long time, and it can be corrected only by heating it with a hairdryer for about 40 seconds. Please do not use this product as a car decoration, so that the product will not be sunburned or scratched people.

About the unpainted model: 
The prime model only contains 3D prints, decals, the actual content is subject to the picture on the product color classification.
Vegetative model for DIY products, no instructions, no special box, no attached glue, paint and other production tools, 
do not recommend that no modeling beginners to make our models. We do not recommend children under 16 years old to make our models.
The model is printed by a professional 3D printer, has been workers preliminary polishing, most of the layers have been smoothed, some fine parts of the inconvenience of bulk sanding, players need to polish their own.
The body of the model is printed as a whole, only a small amount of splicing work.
Most of the parts of the model are connected by magnets, which are recommended to be glued to the model with photosensitive glue, paying attention to the direction of the magnetic poles of the magnets should be the same, so as to avoid the situation that the parts can not be mounted.
It is recommended that all the hangers of the same model have the same magnetic pole direction, so as to make it easier to hang the missiles on different hangers.
3D printed products need to be sprayed with water before coloring, otherwise the paint will easily fall off.
Some parts need to be directly glued to the fuselage, it is recommended to use photosensitive glue splicing, 502 and other parts of the traditional glue does not stick.
Most of the water decal paper with the model in this store is divided into pieces, a small number of decals are integral, need to be cut and used.

About the finished product: 
Our finished models are handmade by OEM masters, and the actual finished products of different masters in different batches will have some differences.
Handmade models inevitably have some defects, can not be compared with the machine mass production of finished products, mind please do not shoot!
Painted finished product photos are for reference only, there may be some differences with the actual finished product.